JMR electronics MARLIN FC-SATA300/SAS User Manual Download Page 38

Page: 38 / 135

Toolbar

Table 2. Toolbar Review provides a brief, functional description of the each
buttons in the toolbar. The toolbar provides easy access to the main activities of
the JMR Storage Manager.

MARLIN

4-6

RLLIIN

16-Bay 4G FC-SATA300/SAS RAID Array Management Users Guide Rev B

Menu Option

Sub-Options

Description

Logical Volume

Create Logical Volume

Creates a Logical Volume. You should
select an array prior to clicking this
option.

Delete Logical Volume

Deletes the selected logical volume from
the associated array configuration.

Increase Size

Increases the size of the selected
logical volume.

LUN Mapping/Masking

Manages LUN Mapping/Masking of
host visibility for the selected logical
volume.

Properties

View and modify the properties of
the selected logical volume.

View

Event Log

Displays the controller-based events
in the system.

Job Manager

Manages active backgrounds jobs
such as Initialize, Rebuild, Expand,
and Verify.

Configuration

System

Manages system properties and
options.

Controller

Manages controller properties and
options.

Summary of Contents for MARLIN FC-SATA300/SAS








































































































































Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands

JMR electronics MARLIN FC-SATA300/SAS, User Manual

Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands