JMR electronics MARLIN FC-SATA300/SAS User Manual Download Page 90

Page: 90 / 135

Figure 97. LUN Mapping Window

The information below explains the fields of the LUN Mapping Window.

Information box

Description of the action, adding and managing
LUN Mapping to one or more logical volumes.

Device Information

Summary of the logical volume just created.

Name:

Displays the name assigned to the logical
volume when it was created, i.e., LogicalVol 1
in this example.

RAID Level:

Displays the RAID level created for this array,
i.e., RAID 5 in this example.

Current Size:

Displays the size assigned to the logical
volume, i.e., 50.31 GB in this example.

Selection Box

Displays five columns of identifying
information.

MARLIN

4-58

RLLIIN

16-Bay 4G FC-SATA300/SAS RAID Array Management Users Guide Rev B

Summary of Contents for MARLIN FC-SATA300/SAS








































































































































Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands

JMR electronics MARLIN FC-SATA300/SAS, User Manual

Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands