46 – Getting Started
Figure 22: Interface Configuration
10. Click the SWS Parallel radio button to select the parallel interface or the AT-DIO-32x button if
the data acquisition card is installed. The text boxes do not change when the radio button is
pressed.
11. To effect the change, click the Modify button. A new dialog box appears (
Figure 23
). In this
dialog box, the parallel port is selected. If the port number is unknown, there is only one port,
or the first port is in use, select 0. If the port is LPT1 or LPT2, select it by clicking the arrow to
highlight the selection. The selection appears in the text boxes at the top. Verify that the
configuration is correct. Click the Finish button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
