Jacobsen Eclipse 322, Repair Manual

Page: 72 / 336

3-40 4222983 Second Edition
GENSET AND BATTERY PACK
3

WARNING
2. Disconnect the negative (–) battery cable (1).
3. Disconnect the positive (+) battery cable (2).
4. Remove two screws (3), lock washers (4), flat
washers (5), and starter battery cover (7).
5. Remove 12V starter battery (6).
Installation Notes
• Install starter battery by reversing the order of
removal.
• Route battery cables between the starter battery and
the machine, avoiding pinch points.
Starter Battery Tray
Removal and Installation
Model 62805 (Diesel)
See Figure 3-74.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
2. Remove starter battery. (See “Starter Battery” on
page 3-39.)
Figure 3-74
3. Remove four screws (2), lock washers (3), and nuts
(4).
4. Remove starter battery tray (1).
Installation Note
Install starter battery tray by reversing the order of
removal.
Model 62803 (Gas)
See Figure 3-75.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
2. Remove starter battery. (See “Starter Battery” on
page 3-39.)
Figure 3-75
3. Remove four screws (1), flat washers (5), lock
washers (4), and nuts (3).
4. Remove starter battery tray (2).
Installation Note
Install starter battery tray by reversing the order of
removal.
Always disconnect the negative terminal first and
positive terminal last. Connect positive terminal
first and negative terminal last. Use care when
testing live circuits to prevent arcing. Arcing
could result in death or serious injury.
TN2452
2 3 4
1
TN2453
1
3
4
5
2