87
87
87
87
3. Use the up and down arrow keys, the numeric keys or the
Jog/Shuttle wheel
to set the
START
gain and
press the
ENTER
key.
4. Use the up and down arrow keys, the numeric keys or the
Jog/Shuttle wheel
to set the
END
gain.
5. Press
the
ENTER
key to calculate the new gain and return the system to
READY MODE
.
UNDO
Lets you undo an edit or record. Undo levels can be set anywhere from 0 to 99. For more information see to
O
PERATIONS
: R
ECORDING
: U
NDO
/R
EDO
REDO
Allows you to redo edits or records that were undone using the
UNDO
function. You may
REDO
as many times
as you performed the
UNDO
function. The ability to
REDO
will be lost upon performing new edits entering
record or switching to another project. For more information see O
PERATIONS
: E
DITING
: U
NDO
/R
EDO
MODIFY EDIT
This function provides a quick way to tweak the parameters of the previous edit without having to
UNDO
and
REDO
. In addition,
MODIFY EDIT
gives you the ability to change the crossfade time of certain edits for an even
greater degree of control. Parameters available for modification include:
!
MARK IN
!
MARK OUT
!
CROSSFADE TIME
!
ORIGINAL TRACK (S)
!
DESTINATION TRACK (S)
!
INSERT OR OVERWRITE
!
SLIDE TIME
!
LOOP COUNT ETC.
To modify an edit:
1. Press
the
MODIFY EDIT
key on the
Session Controller
or use the
MENU/PREV
, arrow keys and
ENTER
key
to go to the
MAIN / EDIT MENU /
MODIFY EDIT
menu item and press the
ENTER
key.
2. Adjust the first parameter of the edit if desired and press the
ENTER
key to proceed to the next parameter.
Pressing the
ENTER
key repeatedly steps through all of the remaining parameters for the edit.
3. Press
the
ENTER
key to re-calculate the edit and return the system to
READY MODE
so that you can audition
the modified edit.