iZ Technology RADAR 24 Operation Manual Download

Page: 55 / 145

Delete Backups

Deleting unwanted archives from DVD-RAM or the internal IDE disk is sometimes necessary to free up
space.

To delete a RADAR



archive from DVD-RAM, the internal IDE disk or network drive:

1. Use

the

MENU/PREV

, arrow keys and

ENTER

key to go to the

MAIN / FILE MENU / FILE MANAGEMENT / DELETE

BACKUPS

menu item and press the

ENTER

key.

2. Use the up and down arrow keys to select the device you wish to delete from in the

../ DELETE FROM

dialog

and press the

ENTER

key. This list will include the RADAR



24 internal IDE drive, any connected SCSI

devices and network shares.

Note: you cannot delete an archive from a data tape.

3. Use the up and down arrow keys to select the folder containing the archive you want to delete and press

the

ENTER

key.

4. If you wish to delete multiple projects you can use the up and down arrow keys in conjunction with the +

and – keys on the numeric keypad to add or remove individual projects from the delete list. Press the

ENTER

key.

5. You will get a dialog

DELETE SELECTED BACKUPS?

Select

YES

to continue,

to cancel and press the

ENTER

key.

ARE YOU SURE?

Select

YES

to continue,

to cancel and press the

ENTER

key.

7. When the operation is complete the display will read

DELETE COMPLETE PRESS ANY BUTTON

Note: If you accidentally delete something, DON’T DO ANYTHING. Proceed immediately to the instructions for

RECOVER BACKUPS below. If you modify the archive disk again in any way your archive will be gone forever!

Recover Backups

If you have accidentally deleted archives from DVD-RAM or the internal IDE drive you have a chance to
recover them. Once you’ve backed up to the drive again it’s gone forever!

To recover deleted RADAR



archives from DVD-RAM, the internal IDE disk or network drive:

1. Use

the

MENU/PREV

, arrow keys and

ENTER

key to go to the

MAIN / FILE MENU / FILE MANAGEMENT / RECOVER

BACKUPS

menu item and press the

ENTER

key.

2. Use the up and down arrow keys to select the device you wish to recover the deleted archive from in the

../RECOVER FROM

dialog and press the

ENTER

key. This list will include the RADAR



24 internal IDE drive,

any connected SCSI devices and network shares.

Summary of Contents for RADAR 24


















































































































































Search results

Summary of Contents for RADAR 24

Reviews:

Related manuals for RADAR 24

Brands by name

Popular brands

iZ Technology RADAR 24, Operation Manual

Search results

Summary of Contents for RADAR 24

Reviews:

Related manuals for RADAR 24

Brands by name

Popular brands