71
71
71
71
3. When playback begins monitoring switches to reproduce mode and all tracks playback audio from the
disk.
4. Entering record mode begins recording on all armed tracks. RADAR
24 switches back to input mode for
monitoring the source signal that’s being recorded.
TRACK SOLO
TRACK SOLO
mutes the output of all tracks except the ones selected using the
TRACK ARM
keys.
TRACK SOLO
can also be automatically engaged in tandem with the
ZOOM SOLO
function, which is used to visually solo a
track or group of tracks on the
RADAR View
display. This preference can be set in the
MAIN / PREFS MENU /
ZOOM SOLO AUDIO
dialog.
To use
TRACK SOLO
mode:
1. Press
the
TRACK SOLO
key on the
Session Controller
or
KC-24
.
2. Use
the
TRACK ARM
keys to select the tracks to solo.
SAFE (CLEAR)
SAFE(CLEAR)
puts all tracks into safe mode. In this state no recording can take place under any
circumstances. By pressing
SHIFT+SAFE(CLEAR)
all tracks with record ready status can be cleared.
To use the
SAFE(CLEAR)
key:
1. Press
the
SAFE(CLEAR)
key on the
Session Controller
or
KC-24
.
2. To clear record ready status on all tracks press
SHIFT+SAFE(CLEAR).
Auto Punch
The
AUTO PUNCH
key is used to enable automatic recording between the
MARK IN
and
MARK OUT
location
markers. In this operational mode recording will only occur once the
MARK IN
location has been reached.
When the
MARK OUT
point is reached recording is automatically terminated.
To use
AUTO PUNCH
mode:
1. Press
the
AUTO PUNCH
key on the
Session Controller
or
KC-24
.
2. Use any locate or transport function to move to a position in the project prior to the current
MARK IN
point.
3. Enter record mode using the
PLAY
and
RECORD
or
RECORD
keys. To enable the
ONE BUTTON RECORD
function, use the
MENU/PREV
, arrow keys and
ENTER
key to go to the
MAIN / PREFS MENU /
RECORD MODE
dialog and select
REC+PLAY
.
Note: When
AUTO PUNCH
is enabled manual recording is not possible.
