84
84
84
84
To move audio:
1. After marking a time region, pressing the
MOVE
key on the
Session Controller
or the
KC-24
or use the
MENU/PREV
, arrow keys and
ENTER
key to go to the
MAIN / EDIT MENU /
MOVE
menu item and press the
ENTER
key.
2. Select the tracks you wish to move. Use the right and left arrow keys to select either
ALL
or
TRACK ARM.
Use the
TRACK ARM
keys to select individual tracks. Press the
ENTER
key.
3. Select the destination tracks. Use the right and left arrow keys to select either
SAME
or
OTHER.
Use the
TRACK ARM
keys to select tracks if you choose
OTHER
. Press the
ENTER
key.
4. Select either the
INSERT
or
OVERWRITE
move modes using the right and left arrow keys and press the
ENTER
key.
5. Use any of the transport/locate functions or the
Jog/Shuttle wheel
to specify the
MOVE TO:
location.
6. Press
the
ENTER
key to move the track-region to the new location.
ERASE
The
ERASE
function completely erases the audio defined by a track-region. Audio following the moved section
will not be affected by this operation.
To erase audio:
1. After marking a time region, press the
ERASE
key on the
Session Controller
or the
KC-24
or use the
MENU/PREV
, arrow keys and
ENTER
key to go to the
MAIN / EDIT MENU /
ERASE
menu item and press the
ENTER
key.
2. Select the tracks you wish to erase. Use the right and left arrow keys to select either
ALL
or
TRACK ARM.
Use
the
TRACK ARM
keys to select individual tracks.
3. Press
the
ENTER
key to erase the track-region from the project.
LOOP
The
LOOP
function repeatedly pastes the selected track-region relative to the
MARK OUT
point. Audio following
the looped section will moved later in time using
INSERT
mode (shown below) and erased when using
OVERWRITE
mode.
PRE- EDIT
MARKED REGION
POST-EDIT
ERASE
LOOP COUNT = 3 INSERT MODE
MARKED REGION
POST-LOOP AUDIO
LOOP 1
MARK OUT
LOOP 2
LOOP 3
SHIFT
PRE- EDIT
ERASED REGION
POST-EDIT
