iZ Technology RADAR 24 Operation Manual Download Page 124

Page: 124 / 145

124

TIME

Displays the pending backup size in hours, minutes and seconds.

EXPORT FORMAT

Here you can set the file format preference for exporting files from RADAR



24. The preference

choices are:

WAV

Exports audio files in the .wav format.

BWF

Exports audio files in the time-stamped Broadcast Wave format.

ASK

Prompts you to choose a file format each time you export.

EXPORT SILENCE

This preference determines whether or not un-recorded sections of exported projects are filled with

zeros to create a track-as-file type export. The preference choices are:

Exports individual audio files for each recording in the project.

YES

Pads un-recorded regions with zeros and exports each track as a separate audio file.

ASK

Prompts you to choose a

FILL SILENCE

option each time you export.

PROJ PREFS

DEF SAMPLE RATE

Sets the default sample rate for projects created using

NEW PROJECT

. Available sample rates will vary

depending on installed hardware options. The sample rate cannot be changed once a project has
recorded audio in it.

DEF BIT RES

Sets the default bit depth for projects created using

NEW PROJECT

. Choose either a 16 or 24 bit

resolution. Bit depth cannot be changed once a project has recorded audio in it.

Summary of Contents for RADAR 24


















































































































































Search results

Summary of Contents for RADAR 24

Reviews:

Related manuals for RADAR 24

Brands by name

Popular brands

iZ Technology RADAR 24, Operation Manual

Search results

Summary of Contents for RADAR 24

Reviews:

Related manuals for RADAR 24

Brands by name

Popular brands