13
3-5 D-RAM Configuration
M1
M2
M3
M4
BANK 0 Socket 1
BANK 0 Socket 2
BANK 1 Socket 3
BANK 1 Socket 4
B A NK 0 S oc ket 5
B A NK 1 S oc ket 6
D
I
M
M
1
D
I
M
M
2
The P55TV Lite/TVS Lite supports different type of system memory. No jumper
needed for this function or configure. This ma inboa rd sepa ra tes four pieces of 72
pins SIMM(Single In Line Memory Module) into two ba nks, a nd a lso two pieces
168 pins DIMM(Dua l In Line Memory Module) into two ba nks, they use the same
a ddress. This mea ns the Ba nk 0 a nd Ba nk 1 only ca n recognize either two pieces
of 72 pins SIMM or one pieces of 168 pins DIMM on ea ch ba nk.
NOTE:
1
. P55TV Lite/TVS Lite support both Fast Page DRAM or EDO
DRAM SIMM/DIMMs also the ECC are supported,but they
cannot be mixed within the same memory bank.
2
. They are the same in Bank 0 or Bank 1. Socket 1,2 and
socket 5 are using the same memory block (Bank 0). They
can not install in the same time. Socket 3,4 and socket 6 are
using the same memory block (Bank 1).
3
. The 70 ns Fast Page Mode or 60 ns EDO DRAM is
recommended.
4
. DIMM specification: 3.3V/ Unbuffered
5. This motherboard supports 4 Clock for each DIMM Socket
Lef t Key Zone
(Unbuf f ered)
Center Key Zone
(3.3V DRAM)
Ma ke sure the DIMM module is 3.3V/ Unbuffered a nd support the Intel Pentium
processor while you insert into the DIMM socket.
Note: End user should not populate both 5V SIMM modules & 3.3V DIMM
modules at the same time.