IRadimed MRidium 3860, Service Manual

Page: 41 / 118

2-7
The following table describes this history log output.
Token Description Format Event
1 Power On SW Revision string At power up
3 KVO Rate changed #.# mL / hr
4 Occlusion Pressure Alarm
Limit (downstream)
changed
# PSI
5 Alarm Volume Limit
changed
# (no units)
7 Dose Error Reduction Soft
Limit Over-ride
Refer to Table 6
8 Dose Error Reduction Hard
Limit Over-ride
Refer to Table 6
10 Infusion Rate
#.# mL/hr, P or PT
#.# mL/hr, S or ST
#.# mL/hr, K or KT
#.# mL/hr, B or BT
Only when Primary (P), Secondary
(S), KVO mode (K) or a Bolus (B) for
channels A or B is started or after
titration (T) is confirmed
11 Volume to be infused #.# mL, P or PT
#.# mL, S or ST
#.# mL, K or KT
#.# mL, B or BT
Only when Primary, Secondary, KVO
mode or a Bolus for channels A or B is
started or after titration is confirmed
12 Volume infused #.# mL, P
#.# mL, S
#.# mL, K
#.# mL, B
#.# mL
Only when Primary, Secondary, KVO
mode or a Bolus for channels A or B is
started, after titration is confirmed, or
the VI is cleared.