IOtech MultiScan 1200, User Manual

Page: 149 / 364

TempScan / MultiScan User's Manual Chapter 9: TempView 139
Set Limits…
Sets the high and low limits for the display of a channel.
This dialog box is similar for all three Meters Windows.
TempView Meters Properties Dialog Box - Limits Tab
(Pop-Up Menu > Set Limits…), (Pop-Up Menu > Show Limits) and (Pop-Up Menu > Properties…)
Show Limits
Displays the limits by assigning colors to the scale regions which equal and fall outside the set limit
values. A red region indicates values which equal or exceed the upper limit, while a blue region
indicates values which equal or fall below the lower limit. For the
TempView Digital Meters Window ,
the upper limits are indicated by the numerals turning red and a red bar appearing at the top of the box,
while the lower limits are indicated by the numerals turning blue and a blue bar appearing at the bottom
of the box.
Properties…
Allows general access to any one of the above pop-up menu items. Note that you can navigate from
any one of the above menu items to another within the same
TempView Meters Properties dialog box.
This dialog box is similar for all three Meters Windows.
TempView Meters Properties Dialog Box - More Button & Expansion Area
(Pop-Up Menu > [Any Menu Item] > More Button)