IOtech MultiScan 1200, User Manual

Page: 123 / 364

TempScan / MultiScan User's Manual Chapter 9: TempView 113
Items labelled by the lettered circles (a to f) are identified in the table below.
Acquisition Configuration Dialog Box – TempScan/1100 Example
(Acquire > Configure Acquisition…)
Acquisition Configuration Dialog Box Areas
( x ) Dialog Box Area TempScan/1100 MultiScan/1200
Normal High-Speed
(a) Trigger Event Area Yes Yes Yes
(b) Stop Event Area Yes Yes Yes
(c) Scan Counts Area Yes Yes Yes
(d) Scan Intervals (or High-Speed Setup) Area Scan Intervals Scan Intervals High-Speed
(e) Mode Area No Yes Yes
(f) Data Destination Area Yes Yes Yes
The six areas of this dialog box – the Trigger Event, Stop Event, Scan Counts, Scan Intervals, Mode,
and Data Destination areas – are discussed in the following text:
•
Trigger Event. The Trigger Event area
(a)
sets a Trigger scan in the acquisition by using one of
the following options:
Keyboard: Use the Console Trigger dialog box via the Acquire > Arm Acquisition menu item.
See Notes below.
External TTL: Use a Rising or Falling external signal.
Channel Value: Use Above or Below channel value for a specified channel.
Alarm: Use a specified On or Off condition.
Absolute Time: Use a specific time of day, and date. See Notes below.