IOtech MultiScan 1200, User Manual

Page: 117 / 364

TempScan / MultiScan User's Manual Chapter 9: TempView 107
Status Area
The Status
(D)
and System State
(E)
areas are located on the right-side third of the TempView Main
Window . These two areas are closely related and are often used in conjunction with each other.
Status & System State Areas
The Status area
(D)
of the TempView Main Window includes the following sub-areas:
•
Status: During an operating task, the Status message box reveals a status note to inform you of the
status of that present task.
•
Upload Progress : Located beneath the Status message box, the Upload Progress bar displays
graphical and numerical (percentage) indicators to inform you of the upload progress.
Here are some examples of Status messages:
•
Attaching to device…
• Setting channel configuration…
•
Setting the acquisition parameters.
•
System idle…
•
Reading scans…
•
Trigger device. Setting acquisition parameters.
• Acquisition active. Updating active.
•
Acquisition active. No updating.
•
Waiting for trigger…
System State Area
The System State area
(E)
of the TempView Main Window includes five labelled indicators for
conveying the state of the system These indicators are dark gray when “off” and bright green when
“on.” The five labels are as follows:
• Initializing
•
Waiting for trigger
• Buffering acquisition in instrument
•
Saving acquisition to disk
•
Uploading data from instrument buffer