IOtech MultiScan 1200, User Manual

Page: 109 / 364

TempScan / MultiScan User's Manual Chapter 9: TempView 99
For more-familiar users who prefer the quickest way to start and operate TempView. Open the
Run dialog box from the Windows 3.X Program Manager or the Windows 95 Start Menu button.
Next, specify a
*.cfg
configuration file as a command line parameter for the TempView program.
Then click OK to execute the command. The TempView Main Window opens. At this point,
startup is complete.
Run Dialog Box
2. The TempView Startup dialog box presents you with two options: Select Device or Load File .
Select Device. Choose Select Device if you are a first-time user of TempView, or if no previous
configuration file was saved. The Select Interface dialog box appears. Continue to Step 3.
Select Interface Dialog Box
Load File. The Load File option is very handy when you want to change the configuration to one
used previously. This saves time, especially when using a large acquisition system with numerous
channels. If you choose
Load File , the Load TempView Setup dialog box appears. Provide a
*.cfg
configuration file and click OK. The TempView Main Window opens. At this point,
startup is complete.
Load TempView Setup Dialog Box
3. The Select Interface dialog box presents you with three options: IEEE 488, RS-232, or Simulated
Instrument . Select a simulated instrument or the same device interface option (IEEE 488 or RS-
232) that you configured for your TempScan/1100 or MultiScan/1200 system.