12
Intermec EasyLAN 100i – User's Manual Ed. 1
Chapter 3 Basic Installation
Environment
Network Configuration
Action
NetWare
NDPS
See Chapter 4 “Setting Up NetWare; Setup
using NDPS”
NetWare
See Chapter 3 “Basic Installation; Basic
S
etup with AXIS NetPilot”
NetWare – Advanced Config.
See Chapter 4 “Setting Up NetWare;
Advanced Installation using AXIS NetPilot”
Windows
NetBIOS/NetBEUI
See Chapter 5 “Setting Up - Windows”
TCP/IP
See Chapter 3 “Basic Installation; Assigning
an IP address”
.
Proceed with Chapter 5 “Setting Up -
Windows”
OS/2
NetBIOS/NetBEUI
See Chapter 6 “Setting Up - OS/2”
UNIX
TCP/IP
See Chapter 3 “Basic Installation; Assigning
an IP address”.
Proceed with Chapter 7 “Setting Up - UNIX”.
After connecting the EasyLAN 100i to your network, you are now
ready to perform the basic setup procedures. The method of instal-
lation that you choose should be dictated by your printing require-
ments and the type of network into which you are integrating.
Installation Methods
Select the appropriate installation method from the table below:
Installation Guide
Installation Tools
The appropriate installation tools for the EasyLAN 100i are sum-
marized in the following table. Always use the latest available ver-
sion of the installation tools.
1
/. A shareware LPR spooler is available for Windows for Work-
groups at
http://www.axis.com/techsup/
.
Environment
Operating System Protocols
Installation Tool
NetWare
IPX/SPX
AXIS NetPilot
Windows 95/98 & NT NetBIOS/NetBEUI
AXIS Print Monitor
TCP/IP
AXIS Print Monitor
Windows 3.1/WfW
NetBIOS/NetBEUI
Axis Print Utility for Windows
TCP/IP
LPR Spooler
1
OS/2
NetBIOS/NetBEUI
Axis Print Utility for OS/2
UNIX
TCP/IP
itinstall
