14
Intermec EasyLAN 100i – User's Manual Ed. 1
Chapter 3 Basic Installation
Basic Setup with
AXIS NetPilot,
cont'd.
The AXIS NetPilot Installation Wizard guides you through the
installation process. The following options are available:
Note:
The number of options varies according to the number of environ-
ments you enable.
Print Server Name
The default EasyLAN 100i print server name consists of the char-
acters ‘INTERMEC’ followed by the last six digits of the serial
number. If you want to change the print server name, just type the
new name in the available text field.
Environments
Choose which networking environments you want to configure the
EasyLAN 100i for, i.e. NetWare, TCP/IP, or Windows & OS/2. If
your network comprises various different platforms, you can en-
able any combination of environments.
NetWare NDS
Place NetWare Print Queues on a specific bindery server, or alter-
natively into an NDS Tree.
The IP address
Choose the method the EasyLAN 100i should employ for obtain-
ing an IP address. DHCP, ARP, RARP, and BOOTP are supported.
You can also choose to set the IP address manually. Refer to
“As-
signing an IP address”
later in this chapter for further information
about setting the IP address.
Print Queues
The EasyLAN 100i uses the print server name followed by the printer
port as the default Print Queue name and print server port name. If
you want to change the default printer queue names, just type the
new names in the available text fields.
Environment
Default Names
NetWare
INTERMEC_LPT1_Q
Windows & OS/2
INTERMEC.LP1
