Intermec EasyLAN 100i – User's Manual Ed. 1
33
Chapter 5 Setting Up – Windows
Using the AXIS Print Monitor with Windows NT 4.0
Follow the procedure below to install Axis Printer Ports from a
Windows NT 4.0 workstation:
NetBIOS/NetBEUI
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click the Add Printer icon.
2. The Wizard asks you to select My Computer or Network printer
server. Select My Computer, as the EasyLAN 100i emulates a
local printer port.
3. Click Add Port... in the Available ports dialog, select AXIS
Port and click New Port...
4. Select NetBIOS/NetBEUI as your choice of network protocol
and click OK.
5. Select the AXIS Port you want to add. The port appears as
<name>.FIF, where <name> is ITC followed by the last six dig-
its of the EasyLAN 100i serial number, e.g. ITC003610. Click
OK.
6. Close the Printer Ports window.
7. Click the Configure Port... button. Choose whether error con-
dition pop-up messages are to be displayed by checking the box
in the Configure Axis Ports dialog. Define the frequency at which
the error messages should be displayed after retry. Click OK.
Continue the installation by clicking Next>.
8. Choose the appropriate printer driver for your printer. Click
Next> and proceed directly to step 11. It is only necessary to
perform steps 9-10 if your printer does not appear in the list.
Note: If you are not certain that the desired printer driver avail-
able in the Manufacturers and Printer Models list is the latest
version, you are advised to use the printer driver provided on
the CD delivered with the EasyLAN 100i.
9. Click the Have Disk... button. Insert the CD that was provided
with your printer, select the CD drive and click OK.
10. Select the printer driver
i
n the *:\Interdrv\DP folder on the CD
and click Next>.
11. Enter an appropriate name for your printer and click Next>.
12. Choose whether you want to share the printer with other net-
work users and click Finish.
Windows NT
