Intermec EasyLAN 100i – User's Manual Ed. 1
91
Appendix 1 EasyLAN 100i Home Page
Configuration,
cont'd.
Print Server, cont'd.
2. NetWare
The following parameters can be set.
• Netware Enabled
Click a radio button to specify NetWare enabled or disabled.
• Print Server Name
Specify the name of the print server. It should consist of the
characters INTERMEC plus the six (6) last digits in the serial
number of the EasyLAN 100i interface board (see the rear plate
of the board).
• Job Check Delay
Set the print server queue polling interval. Default value is 5
seconds.
• Configuration Check Delay
Set the interval between automatic configuration checks. De-
fault value is 300 seconds.
• IEEE 802.3 Frame Type Enabled
Use the radio buttons to enable or disable this option.
• Ethernet II Frame Type Enabled
Use the radio buttons to enable or disable this option.
• IEEE 802.2 Frame Type Enabled
Use the radio buttons to enable or disable this option.
• SNAP Frame Type Enabled
Use the radio buttons to enable or disable this option.
• NCP Burst Mode Enabled
Use the radio buttons to enable or disable this option.
• PSERVER NDS
Enter the name of NDS (NetWare Directory Services) file server
and name of print server including context.
• PSERVER Bindery 1 – 16
Enter the name of the bindery file server. See
Chapter 4 “Setting
Up – Netware; Printing Methods”
.
• NPRINTER/RPRINTER 1 – 8
Enter the print server name and slot number. See
Chapter 4 “Set-
ting Up – Netware; Printing Methods”
.
After having entered the appropriate information and selected the
desired options, press the Submit NetWare settings button.
