manualshive.com logo in svg

Intermec EasyLAN 100I, User Manual, Page: 16 / 113

Share
Download
Intermec EasyLAN 100I User Manual Download Page 16

Intermec EasyLAN 100i – User's Manual Ed. 1

15

Chapter 3     Basic Installation

Basic Setup with
AXIS NetPilot,
cont'd.

Test Page

The test page is only intended for laser printers and similar that
support PostScript and will not work with the EasyLAN 100i.

Unless you want to connect or create additional printing queues,
the installation for the NetWare environment is now completed.

Notes:
• The parameters entered during installation are not permanent;

they can be altered at any time according to your network print-
ing requirements.

• No serious or permanent damage will be caused if you make a

mistake during installation. If at any time you find that printing
is not satisfactory, the parameters can easily be changed to tune
the system to your requirements.

• For information on advanced functions, please refer to the AXIS

Network Print Server Technical Reference. You can download
this or other technical information over the Internet by access-
ing the Axis WWW Home Page at 

http://www.axis.com/

.

Summary of Contents for EasyLAN 100I


















































































































Reviews:

No comments