Intermec EasyLAN 100i – User's Manual Ed. 1
31
Chapter 5 Setting Up – Windows
TCP/IP (LPR)
To be able to print using LPR, you must have installed the EasyLAN
100i in the TCP/IP environment as described in
Chapter 3 “Basic
Installation; Assigning an IP address”
.
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click the Add Printer icon.
2. After clicking Next> in the first dialog, the Wizard asks you to
select Local printer or Network printer. Select Local printer as
the EasyLAN 100i emulates a local printer port. Click Next>.
3. Choose the Intermec printer driver in the displayed Manufactur-
ers list, then select the appropriate printer from the Printers list
and click Next> to proceed directly to step 6. It is only necessary
to perform steps 4 –5 if your printer does not appear in the model
list.
Note: If you are not certain that the desired printer driver avail-
able in the Manufacturers and Printer Models list is the latest
version, you are advised to use the printer driver provided on
the CD delivered with the EasyLAN 100i.
4. Click the Have Disk... button. Insert the CD that was provided
with your printer, select the CD drive and click OK.
5. Select the printer driver
i
n the *:\Interdrv\DP folder on the CD
and click Next>.
6. Select the AXIS LPR Port you want to use and click Next.
Available LPR ports appear as <port name>@<IP address> or
<port name>@<host name>, e.g. [email protected].
- If you want to install a new LPR port, select the Printers@LPR
port and perform all procedures defined in steps 10–18.
- If the LPR already exists, proceed to step 7.
7. Click the Configure Port button. Choose whether error condi-
tion pop-up messages are to be displayed by checking the box in
the Configure AXIS LPR Ports dialog. Define the frequency at
which the error messages should be displayed after retry. Click
OK. Click Next>.
8. Enter an appropriate name for your printer and click Finish.
You should continue with the following steps only if you want to
install a printer to a new LPR port and have chosen
Printers@LPR port previously in step 6.
Windows 95 and
Windows 98,
cont'd.
