Intermec EasyLAN 100i – User's Manual Ed. 1
79
Chapter 9
The following firmware and software can be upgraded:
Firmware
• The EasyLAN 100i print server firmware held in Flash Memory
• The printer's firmware (Intermec Fingerprint)
Software
• AXIS NetPilot configuration software
• AXIS ThinWizard
• AXIS Print Monitor for Windows 95/98 and Windows NT
• AXIS Print Utility for Windows (not included on CD)
• AXIS Print Utility for OS/2 (not included on CD)
You can obtain all the print server and printer firmware as well as
the software utilities from the following locations:
• The EasyLAN 100i CD-ROM.
• Anonymous ftp by logging in to ftp.axis.com and accessing the
folder /pub/axis/ (AXIS software only).
• Over the Internet, by accessing the Intermec Printer Support
home page at
http://printer.intermec.com
. Click on the
“Software” link and locate the relevant firmware or software to
download under the appropriate link. If you are a first time visitor
to this site, you need to fill in a form to get a password.
• Your local Intermec dealer.
Note:
If you are upgrading your print servers using AXIS ThinWizard,
you do not need to obtain the firmware file prior to the upgrading
process, provided that you are connected to the Internet.
You can upgrade the EasyLAN 100i Flash memory using one of
the following softwares or methods:
• AXIS ThinWizard (TCP/IP)
• FTP (TCP/IP)
• AXIS NetPilot Upgrade Wizard (IPX/SPX)
9. Upgrading
Introduction
Obtaining the
Updated Software
Upgrading the
EasyLAN 100i
Firmware
