38
Intermec EasyLAN 100i – User's Manual Ed. 1
Chapter 5 Setting Up – Windows
Installing a printer, cont'd.
8. Select Shared if you want to share the printer over the network.
9. Enter a share name.
10. Click Next and then Finish.
Using the Microsoft LPD monitor with Window NT 3.5x
This section describes how to set up a Windows NT Server v3.5
and v3.51 for LPD printing over the TCP/IP protocol, using the
built-in Microsoft LPD monitor.
Basic Setup
If you have not already done so, you should perform the TCP/IP
basic setup procedures prior to installing a printer for LPD printing.
These procedures are defined in
Chapter 3 “Basic Installation; As-
signing an IP address”
.
Install the TCP/IP Protocol Stack
In the Control Panel, click the Network icon. If the TCP/IP Printing
entry appears, then TCP/IP is already installed. Close the Network
folder and continue with “Installing a printer” on next page.
Follow these steps to install the TCP/IP protocol stack:
1. In the Control Panel, select Network.
2. Click Add Software...
3. Select “TCP/IP Protocol and related components” and then
click Continue.
4. Check “TCP/IP Network Printing Support” and then click
Continue.
5. Select path and then click Continue.
6. Click OK in the Network Settings dialog box.
Windows NT,
cont'd.
