42
Intermec EasyLAN 100i – User's Manual Ed. 1
Chapter 5 Setting Up – Windows
Windows 3.1
In order to print to a network printer, Windows 3.1 requires the
installation of network support, such as the LAN Server or LAN
Manager Workstation software. When installed, proceed as described
under Windows for Workgroups below.
Windows for Workgroups
Peer-to-Peer Printing
Follow the instructions below to install your EasyLAN 100i for
peer-to-peer printing at a Windows for Workgroups workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add.
3. In the NPS Port list, select the EasyLAN 100i port. The port
appears as <name>.LP1, where <name> is INTERMEC followed
by the last six digits of the EasyLAN 100i serial number, e.g.
INTERMEC003610.
4. Accept or change the suggested Windows port name and type
any required comment in the Description field. Make a note of
the Windows port name as you will need this later, then click
OK to install the Windows port.
5. In the Port menu, click Connect... to bring up the Windows
Printers dialog.
6. Select a printer driver from the list of Installed Printers (or click
Add>> to install a new driver), then click Connect...
7. Select the Windows port name from step 4 above (this name can
be found at the bottom of the Ports list).
8. Click OK to close the Connect dialog, and Close to close Print-
ers.
The setup is completed and you can now print through your
EasyLAN 100i.
Note:
AXIS Print Utility for Windows must be running when you print
through your EasyLAN 100i. We strongly recommend that you
copy the AXIS Print Utility icon into your StartUp folder.
Windows 3.1 and
Windows for
Workgroups
