Intermec EasyLAN 100i – User's Manual Ed. 1
35
Chapter 5 Setting Up – Windows
TCP/IP (LPR) , cont'd.
13. Select the printer driver
i
n the *:\Interdrv\DP folder on the CD
and click Next>.
14. Enter an appropriate name for your printer and click Next>.
15. Choose whether you want to share the printer with other net-
work users and click Finish.
Using the AXIS Print Monitor with Windows NT 3.5x
Follow the procedure below to install Axis printer ports from a
Windows NT 3.5x workstation:
NetBIOS/NetBEUI
1. Open the Print Manager and select Create Printer from the
Printer menu.
2. Enter an appropriate name in the Printer Name field.
3. Choose an appropriate printer driver for your printer from the
Manufacturers and Printer Models list and then proceed directly
to step 6. Please note that it is only necessary to perform steps
4–5 if your printer does not appear in the model list.
Note: If you are not certain that the desired printer driver avail-
able in the Manufacturers and Printer Models list is the latest
version, you are advised to use the printer driver provided on
the CD delivered with the EasyLAN 100i.
4. Click the Have Disk... button. Insert the CD that was provided
with your printer, select the CD drive and click OK.
5. Select a printer driver (see note) and click Next>.
6. Select Other... in the “Print to” list box.
7. Select Axis Port in the list of available Print Monitors and click
OK.
8. Select the AXIS Port you wish to add and then click OK. The
port appears as <name>.FIF, where <name> is ITC followed by
the last six digits of the EasyLAN 100i serial number, e.g.
ITC003610.
9. Click on Settings. Choose whether error condition pop-up mes-
sages are to be displayed by checking the box in the Configure
Axis Ports dialog. Click OK.
10. Click OK.
Windows NT,
cont'd.
Note:
Presently, the Intermec Inter-
Driver does not support Win-
dows NT 3.5x, but a generic
printer driver could be used.
