manualshive.com logo in svg

Intermec EasyLAN 100I, User Manual, Page: 83 / 113

Share
Download
Intermec EasyLAN 100I User Manual Download Page 83

82

Intermec EasyLAN 100i – User's Manual Ed. 1

Chapter 9     Upgrading

Upgrading using AXIS NetPilot

This method is recommended for upgrading the flash memory in
NetWare networks. An Upgrade Wizard is available to guide you
through the necessary procedures.

Follow the instructions below to upgrade your print servers:

1. Obtain the firmware file, using one of the methods presented at

the start of this chapter.

2. Put the file in the AXIS NetPilot ‘Upgrade’ folder. This folder

resides in the same folder as the AXIS NetPilot program and
was created when AXIS NetPilot was installed on your client.

3. Start the Upgrade Wizard by clicking on the Upgrade icon on

the AXIS NetPilot toolbar.

4. Proceed the installation by following the instructions that are

presented to you in the Upgrade Wizard.

If you need more information, please refer to AXIS NetPilot on-
line help.

Upgrading the
EasyLAN 100i
Firmware, cont'd.

Summary of Contents for EasyLAN 100I


















































































































Reviews:

No comments