Intermec EasyCoder 301 – Service Manual Ed. 3
17
Chapter 5 Paper Supply
5.1
Internal Supply,
cont'd.
Media Guides
To ensure that the paper is fed straight through the print unit, there
are two identical shafts with rollers and adjustable guide rings fitted
to the centre-line wall of the standard model and one shaft on the
LinerLess model. The upper, front one is used for the paper going
into the print unit and the rear, lower one
1
is used for the backing
paper in connection with peel-off operation.
Each roller is fitted with two guide rings. The inner, smaller one
should be in flush with the inner end of the roller, while the outer,
larger one should be adjusted according to the with of the paper web.
The roller is locked on the shaft using a circlip.
Refer to the EasyCoder 301 (LinerLess) Installation & Operation
manual for complete loading instructions.
Shaft
Inner Guide Ring
(fixed position)
Outer Guide Ring
(adjustable)
Roller
Circlip
Media Guides
1
/. Not in the LinerLess model.
