Intermec EasyCoder 301 – Service Manual Ed. 3
3
Chapter 0 Introduction
This Service Manual is intended to facilitate installation, trouble-
shooting and repair of the Intermec EasyCoder 301 in the version
delivered at the date of publishing. Thus, all information on the
firmware is based on version 2.00. The on-going product improve-
ment can be followed in the Printer Technical Bulletins from
Intermec.
This Service Manual is supplemented by the following publica-
tions, which the service technician also should keep easily avail-
able:
• Intermec EasyCoder 301; User's Guide
• Intermec EasyCoder 301 LinerLess; User's Guide
• Intermec EasyCoder 301; Installation & Operation
• Intermec EasyCoder 301 LinerLess; Installation & Operation
• Intermec EasyCoder 301; Spare Parts Catalogue
1
• Intermec EasyCoder 301 Direct Protocol; Programmer's Guide
Please note that the operations described in this manual only should
be carried out by skilled and authorized personnel with proper
training and full understanding of written English. The printers
contain wires and circuits with 100/240V AC voltage, which
implies the risk of electrical shock. Moving parts may also cause
harm, if incorrectly manipulated.
It is assumed that the reader possesses reasonable skills in mechan-
ics and electronics and is familiar with the EasyCoder 301 firmware
and its related standard application programs. It is also assumed that
the reader has access to the standard tools of an electronics
workshop.
Last minute notice!
Posidrive screws will be replaced by Torx screws in production of
EasyCoder 301 during the fall of 1999.
0.2
Preface
1/. The Service manual and the Spare
Parts Catalogue cover both the standard
EasyCoder 301 model and the Easy-
Coder 301 LinerLess model.
