Intermec EasyCoder 301 – Service Manual Ed. 3
7
Chapter 1 Models and Options
1.2
Specifications
Print Technique (std. model)
Direct Thermal/Thermal Transfer
Print Technique (LinerLess model)
Direct Thermal on standard and Linerless media
Print Resolution
8 dots/mm (203.2 dots/inch)
Quick-mount Printhead
Yes
Maximum Print Width
104 mm (4.09")
Maximum Media Width
114 mm (4.5")
Smooth Fonts
Yes
Print Directions
4
Maximum Internal Paper Roll Diameter
152 mm (6")
Maximum Ribbon Length
~200 M (656 feet)
Dimensions (W x D x H)
235.5 x 352.9 x 169.3 mm (9.27 x 13.89 x 6.67 ")
Weight (excluding media & options)
4.7 kgs (10.3 lbs)
Ambient Operating Temperature
+5
°
C – +40
°
C (+41
°
F – +104
°
F)
Humidity
20 –80% non-condensing
Sound Emission Level
< 60 dB (A)
Microprocessor
32 bit
Firmware
Intermec EasyCoder 301 Direct Protocol 2.00
Label and Ribbon End Sensors
Yes
Mains Voltage
115/230VAC (+10%/-15%) 4/2A, 60/50Hz
Build option
PFC Regulation
IEC 61000-3-2
Maximum Power Consumption
Stand-by 30W; Typical label 70W; Maximum 250W
Communications Interface Standard
1 x RS 232C Serial and 1 x Centronics Parallel
Print Speed (tear off)
100 or 150 mm/sec (4 or 6 inches/sec)
Print Speed (peel off/roll Ø 152 mm)
100 mm/sec (4 inches/sec)
Recommended
Print Speed (LTS enabled)
100 mm/sec (4 inches/sec)
F/W restricted
Bar Code Generators
37
On-board Flash EPROMs
2 x 512 kbytes
On-Board RAM Memory
512 kbytes
RS 232C Cable
Optional
Centronics Parallel Cable
Optional
Real Time Clock (RTC)
Optional
Label Taken Sensor (LTS)
Fitted
Paper Cutter
Optional
std. model only
Scalable Fonts
Built-in
Memory Card Slot
1 PCMCIA 5V Type 3, or 2 PCMCIA 5V Type 1 or 2
