Intermec EasyCoder 301 – Service Manual Ed. 3
42
Chapter 10
10. Electronics Compartment
10.1 Accessing
the Electronics
Compartment
To gain access to the electronics compartment, proceed as follows:
• Turn off the power and remove the power cord.
• Disconnect all interface cables at the printer's rear plate.
• Open the front and user covers.
• Remove the Posidrive screw at the rear of the media compart-
ment.
• Remove the Posidrive screw in the recess for the bar code wand
interface.
• Pull out the cover, taking care not to damage the wire-locks on
the Centronics connector on the printer's rear plate.
10.2 Main Parts
CPU board
Memory Card Adapter
Main Switch
Mains Inlet
Stepper Motor
Wand Interface
Cutter Interface
Operator Interface
WARNING!
Before removing the electrics
cover, turn off the printer and
disconnect the power cord. High volt-
age wires and circuits inside.
