Intermec EasyCoder 301 – Service Manual Ed. 3
15
Chapter 4
4. Chassis
The chassis consists of two main parts; the bottom plate and the
centre-line wall. These parts should not be separated. Being made
of the same rugged composite material as the covers, they are not
likely to break and are thus not available as spare parts.
Description
The centre-line wall separates the media and electronics compart-
ments. Most modules in the printer are fitted to the centre-line wall,
with the exception of the user and front covers.
Description
The bottom plate holds the centre-line wall with all its connected
modules, the front cover, and the user cover. It also supports the
outer end of the platen roller and the tear-off edge. On the bottom
side of the bottom plate, there are four rubber feet and a product label
(see chapter 1.1).
Rubber Feet Replacement
• Turn the printer upside down of some kind of soft material to
avoid scratches.
• Using e.g. a screwdriver, lift out the worn rubber foot.
• Insert a replacement rubber foot in the hole and press so its
shoulder engages the bottom plate.
4.1
Centre-line Wall
4.2
Bottom Plate
