Installation / Assembly
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 44 of 84
© inge GmbH
5.7
Mounting Module 1
5.7.1
Assembling the Filtrate Pipe Assembly
Step
Activity
Figure
1
Lubricate the gaskets with glycerin
a)
Remove the gaskets of the flexible couplings 2”.
b)
Lubricate the gaskets with glycerin on the inside and
outside.
2
Mount the gaskets on the filtrate pipe
a)
Mount one of the lubricated gaskets over one opening
of the transparent filtrate pipe.
b)
Push the gasket onto the pipe so it is flush with the end
of the pipe.
c)
Repeat the procedures a) and b) for the opposite
opening.
3
Mount the gasket on the filtrate port of the module
a)
Remove the protective cap from the filtrate port of the
module.
b)
Mount the third lubricated gasket over the opening of
the filtrate port.
c)
Push the gasket onto the filtrate port so it is flush with
the end.
