Installation / Assembly
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 39 of 84
© inge GmbH
5.4
Checking the Delivery
5.4.1
Moving the Packages to the Work Area
Move all packages of the sub-unit being mounted to the vicinity of the work area using suitable transport
equipment.
5.4.2
Checking for Damage
Step
Activity
1
Checking Packages and Parts
a)
Check all packages of the delivery for damage.
b)
Open all damaged packages.
c)
Check all models and/or parts it contains for damage.
2
Procedure for Damaged Modules or Parts
a)
Photograph the damage and the associated package label.
b)
Document all damage and the respective module serial numbers and associated package
numbers in writing.
c)
Inform your contact at inge GmbH promptly about the damage. Damaged parts of a delivery
are not permitted to be installed until a decision has been made by inge GmbH.
d)
The decision regarding whether the damaged module or part must be returned or if it can be
used is made by your contact at inge GmbH.
Further Use of Parts
You are only permitted to continue to use and install the following modules and parts:
All modules and parts without damage
Damaged modules and parts with written approval from inge GmbH with a specific reference to
the damaged module or part
inge GmbH decides on the procedure (approval or block) for all damaged modules or parts that have not been
approved.
CAUTION
DANGER OF INJURY!
Danger of injury during operation due to the installation and use of
damaged parts.
Only use undamaged parts or parts approved by inge GmbH!
