Installation / Assembly
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 33 of 84
© inge GmbH
5.2.3
Calculation of Personnel Requirements
Personnel Requirements for Mounting a Module without a Crane
CAUTION
DANGER OF INJURY!
Danger of injury due to physical strain.
Determine the weight of the module in use!
Always note the locally applicable maximum permissible load of
persons!
Note the specified number of persons required!
To mount the module without a crane, calculate the number of persons required as follows.
1. Determine the transport weight of a module you are using from the
2. Determine the maximum permissible load on a person from the locally applicable laws and safety
regulations.
3. Calculate the required number of persons required to lift a module by dividing the module transport
weight by the maximum permissible load per person.
Always use the calculated number of persons when a module needs to be lifted and placed on a connecting
brace. In our example configuration, a total of 3 persons was determined and specified. Always replace this
number by the number you actually determined yourself.
The total number of persons required is always one person more since when setting up modules 1 to 3, one
person must hold the already installed modules vertical while the others lift and position another module.
Personnel Requirements for Other Tasks
Unless otherwise specified, all other tasks require one person.
If steps require two or more persons, this is specified in each case.
A maximum of 4 persons are needed.
