Installation / Assembly
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 31 of 84
© inge GmbH
5.2
General Specifications
5.2.1
T-Rack
®
s and Sub-Units
A T-Rack
®
3.0 consists of one or more sub-units, each with 4 to 68 modules in two or four module rows.
Example: T-Rack
®
consisting of three sub-units, each with 12 modules in two rows:
These instructions describe the installation of a free-standing sub-unit of a T-Rack
®
with a total of 12 modules
in two rows. The procedures and steps similarly apply to variants with fewer modules in two rows.
In general, only inge
®
original parts are approved for installation of the T-Rack
®
series.
The existing connecting pipework must be free of contaminants which can cause abrasion or
fouling.
All coated frame parts must be treated with care. If the coatings should become damaged, they
must be resealed with a protective coating or exchanged.
Connecting of a sub-unit to an existing sub-unit is described in the next section:
Assembly of Multiple Sub-Units to one
T-Rack
®
