Safety
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 10 of 84
© inge GmbH
2.2.1
Residual Risks
Despite the inherently safe design as per DIN EN ISO 12100, the following residual risks remain:
Danger of crushing from falling raised loads
Danger of crushing by industrial trucks and other equipment at the construction site
Danger of injury from faulty and incomplete assembly
Danger of falling when using ladders, scaffolding and other climbing aids
Danger of crushing and shearing from work in the danger zone
Cutting and impact injuries from sharp corners and edges
Danger of tripping and impact from pallets, packages and assembled parts at the construction
site
Danger of injury due to physical strain
Danger of injury due to constricted space
Danger of injury due to inadequate room height
Danger of injury and system damage due to exceeding the maximum permissible floor load
Danger of injury to bystanders, machines and devices in the work area
Danger of injury during operation due to the installation and use of damaged parts
NOTE
In these instructions, these residual risks are indicated by
appropriate safety and warning instructions.
2.2.2
Conversions and Modifications
Conversion or modification is only permissible with the written approval from the manufacturer.
2.2.3
Repairs
Repairs may only be performed by qualified personnel following consultation with the manufacturer.
