Inficon Micro GC Fusion 2-Module Operating Manual Download

Page: 145 / 319

INFICON

Connecting to a Sample | 7

074-594-P1H Micro GC Fusion Operating Manual

145 / 319

3 Place the Teflon front ferrule and the Teflon back ferrule into the 3/16 in.

stainless steel nut.

Place the Teflon back ferrule into the nut with the narrow end facing
outwards.

Place the Teflon front ferrule into the nut with the narrow end facing outwards.
The two ferrules are designed to fit together.

4 Screw the 3/16 in. stainless steel nut with the Teflon ferrules back into the

reducing union (PN 059-0298).

5 Insert the 1/4 in. tube fitting on the 3 L sample bag into the 3/16 in. end of the SS

Adapter for the Sample Bag and screw clockwise until finger tight.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands

Inficon Micro GC Fusion 2-Module, Operating Manual

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands