Inficon Micro GC Fusion 2-Module Operating Manual Download

Page: 78 / 319

6 | Installation

INFICON

78 / 319

074-594-P1H Micro GC Fusion Operating Man-

ual

9 Adjust the front bumpers so that the gas-liquid separator lays flat on the surface.

10 Insert the sample output tubing for the 2-module chassis (952-4029-P4) into the

Valco fitting on the gas-liquid separator. Do not tighten. The tubing should be
loose.

11 Place the 1/16 in. nut (059-0696) and the ferrule set (059-0697) onto the end of

the sample output tubing going to Micro GC Fusion.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands

Inficon Micro GC Fusion 2-Module, Operating Manual

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands