Inficon Micro GC Fusion 2-Module Operating Manual Download

Page: 106 / 319

6 | Installation

INFICON

106 / 319

074-594-P1H Micro GC Fusion Operating Man-

ual

6.13.1.6 Installing the 10-Port SF Valco Stream Selector Accessory

1 Identify sample line 1 IN and remove the black filter caps from the desired

sample line ports.

2 Place a union fitting and ferrule onto a 1/16 in. OD stainless steel sample line.

3 Connect the 1/16 in. sample line to the 1 IN filter on the Valco stream selector.

4 While holding the filter with a 7/16 in. wrench, use a 1/4 in. wrench to turn the

union fitting. Over-tighten by 1/2 turn to swage the union fitting and ferrule onto
the 1/16 in. sample line.

5 Loosen the union fitting and then tighten it again.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands

Inficon Micro GC Fusion 2-Module, Operating Manual

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands