Inficon Micro GC Fusion 2-Module Operating Manual Download

Page: 133 / 319

INFICON

Installation | 6

074-594-P1H Micro GC Fusion Operating Manual

133 / 319

12 Adjust and tighten all the nuts using a 3/8 in. wrench to fix the mounting bracket

on the instrument chassis.

13 Put the Valco ferrule (PN 059-0335) and the nut (PN 059-0336) on the inlet tube.

14 Insert the sample tubing with the Valco fittings into the fitting detail on the Genie

filter. Push the tubing all the way into the detail, so that it seats firmly. Manually
turn the nut into the detail until it is finger tight.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands

Inficon Micro GC Fusion 2-Module, Operating Manual

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands