Imagine Selenio X100, Installation And Operation Manual

Page: 163 / 178

Selenio X100
Installation and Operation Manual
151
Fan Module Replacement (131-100021000)
Each front fan module (part number 131-100021000) is individually mounted and
connected. The wiring connector to each fan enters from its top right corner (when viewing
the fans from inside the frame). The number 2 fan is aligned differently: the wires enter at
the bottom left corner. Follow these steps to remove and replace a fan:
1 Disconnect both AC power cords to the unit.
2 Remove the front panel control assembly, as described on page 149.
3 Remove the two mounting screws for the failed fan.
4 Use a small screwdriver to carefully twist and release the locking tab, and then unplug the
fan’s power connector (
Figure B-6 ).
Figure B-6. Fan Wires
5 Remove the failed fan, and then attach the new fan using the screws provided.
Ensure the new fan is forcing air into the frame ( Figure B-7 ).
Figure B-7. Fan Direction
6 Attach the connector to the fan, and then reverse the steps found in Cover Removal and
Replacement on page 148.
Carefully twist and
open connector with
screwdriver
Airflow
direction