Imagine Selenio X100, Installation And Operation Manual

Page: 126 / 178

Selenio X100
Installation and Operation Manual
114
Downmix L/R Encoding
Mode Specifies the encoding mode for the left and right
channels

Phantom Center

Hard Center
Downmix LFE Cutoff Specifies the cutoff frequency of the input LFE
channel

0 Hz

60 Hz

80 Hz

100 Hz

120 Hz

140 Hz
Multi Final Limiter
Ceiling Specifies the threshold where final limiting on the
surround output occurs -20 dBFS to 0 dBFS
Stereo Final Limiter
Ceiling Specifies the threshold where final limiting on the
auxiliary stereo output occurs -20 dBFS to 0 dBFS
Table 4-6. DTS Neural Surround Audio MultiMerge Parameters (Continued)
Table 4-7. Input Selection Mode Option Descriptions
Option Notes
Mix

This option sums the Aux input to the L/R of the 5.1 input.

The AES1, AES2, AES3 inputs are 5.1 (L/R, C/LFE, Ls/Rs) in.

The AES4 input is 2.0 in (L/R) in.

The AES1 output is a sum of AES 1 and AES 4 (AES1L + AES4L, AES1R + AES4R).

The AES2 output is C/LFE.

The AES3 output is LsRs.
Multi

This option only sources audio from the 5.1 input.

Inputs are AES1 (L/R), AES2 (C/LFE), AES3 (Ls/Rs).

Outputs are AES1 (L/R), AES2 (C/LFE), AES3 (Ls/Rs).

AES4 is not used
Stereo

Audio is sourced from only the L/R pair, while simultaneously muting the C/LFE and Ls/Rs pairs
of the 5.1 input (used in situations where there is information on the other inputs that you
would want to ignore).

Input is AES1 (L/R)

Output is AES1 (L/R)

AES2, AES3, AES4 are not used
Aux

This option only sources audio from the Aux input.

Input is AES4 (L/R).

Output is AES4 (L/R).

AES1, AES2, AES3 is not used
Multi Detect

If audio is present on the 5.1 input, the Aux input is overridden.

Inputs are 2.0 on AES1 (L/R) or 5.1 on AES1 (L/R), AES2 (C/LFE), AES3 (Ls/Rs) or 2.0 on AES4 (L/
R).

Outputs are 5.1 on AES1 (L/R), AES2 (C/LFE), AES3 (Ls/Rs) and 2.0 on AES4 (L/R)