Imagine Selenio X100, Installation And Operation Manual

Page: 164 / 178

Appendix B
Servicing
152
Power Supply Replacement (X100-PSU-200W)
The X100 includes two power supplies. In the event of a power supply failure, follow these
steps to remove and replace the unit:
1 Remove the top cover, as described on page 148, ensuring both AC power cords are
unplugged.
2 Remove the input and output connectors of the failed power supply by squeezing the tab
on the connectors and separating the connectors from the power supply (
Figure B-8 ).
3 Remove and save the four power supply mounting screws, and lift out the power supply
unit.
Figure B-8. Power Supply Removal
4 Install the new power supply using the screws provided, and re-attach the connectors.
5 Reverse the steps found in Cover Removal and Replacement on page 148.
Remove four screws.
Separate the input
and output power
supply connectors.