Imagine Selenio X100, Installation And Operation Manual

Page: 161 / 178

Selenio X100
Installation and Operation Manual
149
Front Panel Control Assembly
For fan replacement or control panel servicing, continue with the following steps to remove
the front cover.
1 Remove the 9 screws from the front cover (including top and bottom), but do not remove
screws from the side mounting ears (
Figure B-3 ).
Figure B-3. Removing Screws on the Front Panel Control Assembly
2 On a level surface, gently slide the front cover control assembly forward ( Figure B-4 ) until
you can comfortably reach the ribbon cable connector (DO NOT allow the front assembly to
drop).
Figure B-4. Sliding Front Panel Off
Remove five screws from the bottom of the
front panel control assembly.
Remove five screws from
the top of the front panel
control assembly.
Slide the front panel out.