Imagine Selenio X100, Installation And Operation Manual

Page: 94 / 178

Selenio X100
Installation and Operation Manual
82
Audio Inputs and Outputs
Inputs
Selenio X100 supports embedded-audio input, AES audio input, and analog audio input. In
addition, the X100 processes embedded audio from the SDI video input in SD, HD, or 3G
(Level A and Level B-DL) formats, and include two independent audio de-embedders—each
supporting sixteen mono channels.
Any de-embedded group may contain compressed
audio, linear PCM, or a combination of both.
The X100 supports up to sixteen AES inputs.
Note : AES inputs can be disabled by the Green-Power Save control ( Misc >
Green-Power Save ). If an AES input is grayed out in the user interface, check its power
save status.
Outputs
The Selenio X100 outputs the following audio channels:

16 embedded channels to Embedder 1

16 embedded channels to Embedder 2

32 channels for up to 16 AES outputs

8 analog mono output channels

8 HDMI mono audio output channels
Additionally, up to 32 channels are available from the optional Advanced Audio Processing
block.
Any of these source channels can be routed to any destination.
Figure 3-31 Audio Status Parameters
Peak/Mute
Status
Audio
present
A S
Silence
present
P
Peak
present
= =
No signal
present
Audio V-Bit
No V-bit present
V-bit present
= = = = V V
Audio Format
Feedback
PCM present
T P D
Data
present
= =
No data
present
Alignment
tone
present