Selenio X100
Installation and Operation Manual
99
M12: MultiMerge, Loudness Control
(low/high latency)
112.2 ms (low) / 133.53
ms (high)
74.86 ms (low) /
96.19 ms (high)
71
8 DTS
M13: UpMix, Loudness Control
(low/high latency)
112.2 ms (low) / 133.53
ms (high)
74.86 ms (low) /
96.19 ms (high)
50
4 DTS
M14: DownMix, Loudness Control
96.2 ms
58.86 ms
19
4 DTS
M15: Loudness Control 5.1+2.0
96.2 ms
58.86 ms
34
4 DTS
M16: Loudness Control 2x1.0
96.2 ms
58.86 ms
20
1 DTS
M17: Loudness C Dolby
Digital and Dolby Digital Plus Encode
5.1
192 ms (RTLL/DDE;
RTLL/DDPE; DTS/DDE;
DTS/DDPE)
138.67 ms (RTLL/
DDE; RTLL/DDPE)
52 (RTLL/DDE
1 RTLL, 1 DDE
80 (RTLL/DDPE)
1 RTLL, 1 DDPE
176 ms (DTS/DDE;
DTS/DDPE)
57 (DTS/DDDE)
3 DTS, 1 DDE
85 (DTS/DDPE)
3 DTS, 1 DDPE
M18: Loudness C Dolby E
Encode 5.1+2.0
2 48 ms
3.13 frames
77
1 DEE, 4 DTS
M19: Loudness C Dolby E
Encode 4x2.0
2 48 ms
3.13 frames
88
1 DEE, 4 DTS
M20: Dolby Digital and Dolby Digital
Plus MultiMerge (low/high
latency)
Not applicable
1
82.58 ms
88
4 DTS, (1 DDD
or 1 DDPD)
M21: Dolby E MultiMerge
(low/high latency)
Not applicable
2
2 16 ms
(low) / 2
37.33 ms (high)
1 DED, 4 DTS
M22: Dolby E, Dolby Digital, and
Dolby Digital Plus
MultiMerge (low/high latency)
Not applicable
3
82.73 ms
88
4 DTS, 1 DED.
(1 DDD or 1
DDPD)
* MCPS is not relevant for minimum latency.
1. For M20: using M7 on AAP1 looped to M3 on AAP2
2. For M21: using M8 on AAP1 looped to M3 on AAP2
3. For M22: using M9 on AAP1 looped to M3 on AAP2
Table 4-1.
Advanced Audio Processing Modes, Latency, MCPS, and Credit Cost (Continued)
Mode
Normal Latency
Minimal
Latency
MCPS,
Normal
Latency *(%)
Credit Cost
Summary of Contents for Selenio X100
