Imagine Selenio X100, Installation And Operation Manual

Page: 56 / 178

Selenio X100
Installation and Operation Manual
44
Mode
Depending on the current input/output video standard setting, the X100 operates in one of
four modes: upconversion, crossconversion, downconversion, or SD-ARC. The current
operating mode is shown in the
ARC Mode Fb parameter in the Status menu.
When input video standard or output video standards change, the X100 may switch to a
different conversion mode, and the required ARC setting may be different. For this reason,
the options are set according to the conversion mode, and you can pre-configure the
settings for each mode. When mode switching happens, settings will always take effect
immediately.
Save ARC
Use these presets for saving custom ARC settings. You can save five presets for each type of
conversion (up, cross, down, etc.).
Recall ARC
This parameter recalls a pre-existing ARC setting.
Custom AFD and Custom VI
This parameter sets the AFD and VI codes associated with a custom defined arc setting.
Options are:

None (default)

(4:3) 0000-UNDEF

(4:3) 0001-RSVD

(4:3) 0010-16:9 top

(4:3) 0011-14:9 top

(4:3) 0100-gt 16:9

(4:3) 0101-RSVD

(4:3) 0110-RSVD

(4:3) 0111-RSVD

(4:3) 1000-4:3 full

(4:3) 1001-4:3 full

(4:3) 1010-16:9 l

(4:3) 1011-14:9 l

(4:3) 1100-RSVD

(4:3) 1101-4:3 a 14:9

(4:3) 1110-16:9 la 14:9

(4:3) 1111-16:9 la 4:3

(16:9) 0000-UNDEF

(16:9) 0001-RSVD

(16:9) 0010-16:9 full

(16:9) 0011-14:9 cntr

(16:9) 0100-gt 16:9

(16:9) 0101-RSVD