Imagine Selenio X100, Installation And Operation Manual

Page: 42 / 178

Selenio X100
Installation and Operation Manual
30
Output Routing
The Output Routing parameters assign the SDI outputs to their processing channels.
The SDI x Out Select parameters control which video channel is assigned to the four SDI
outputs. Options are Processing Channel 1 (default) Processing Channel 2, Processing
Channel 1 + OSD, and Processing Channel 2 + OSD .
The same options are available using the SFP x Out Select, HDMI Out Select, and Analog
x Out Select parameters.
Note : External video inputs and outputs can be disabled by the Green (Power Save)
control located in the Miscellaneous section. If an external video control is grayed out in
the user interface, check its power save status.
Operation Mode
Dual Channel
In this mode, both channels are completely independent (however, both channels share the
same genlock reference).
Live I-Wings Mode
The Live I-Wings mode displays video or graphics on the two “wings” on either side of an
SDI signal located within a larger aspect ratio signal.
Figure 3-1 I-Wings Mode
Live I-Wings integrated content insertion keys HD- or SD-SDI content into the sidebar
portion of the output image raster using the X100 internal keyer. The input to channel one,
is the main center image; the input to channel two provides the “wings”.This option is
useful, for example, in applications where upconversion of SD-SDI 4:3 content is being
performed, and insertion of additional content is required in the 16:9 upconverted image
raster's sidebars.
To set up the Live I-Wings feature, follow these steps:
1 Set the ARC parameters as required.
Live I-Wings will only appear in the background area. Therefore, ARC settings that are
anamorphic will block I-Wings from appearing.
2 Select Live I-Wings in the Operation Mode parameter .
Scalar
Proc
Mux
Processing
Channel 1
Demux
Sync
Frame
sync
Frame
sync
Processing
Channel 2