ILUMINAGE iluminage TOUCH, User Manual

Page: 40 / 204

34
EN/
ES
No lights are on. Connect power cable. Power cable is not con-
nected.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
TROUBLESHOOTING
1. 1.
All elōs energy setting
buttons on the base are
blinking
(HIGH-MEDIUM-LOW). No elōs energy level has been
selected. Select an elōs level. 1. 1.
elōs activation button
on the applicator is
blinking.
Error light is on.
elōs energy level has been
selected but elōs activation
button has not been pressed
yet.
System needs to be reset.
Press the elōs activation
button. The applicator fan
will start blowing indicating
that the elōs cartridge is
active. 1.
Reset the system by turn-
ing it off and on again.
If problem persists,
disconnect power cable
and wait until all lights are
off (several seconds). Then
reconnect the power cable
and turn the system on.
If error light is still on, try
moving to a cooler area
with a room temperature
of less than 30°C/86°F and
restart the system. 1.
2.
3.
1.
1.