Idis ID391H User Manual Download

Page: 78 / 98

User’s Manual

External Saving

Click the

(External Saving) button at the top right of the SmartSearch.



Eject

Close:

Ejects the disk from the drive or closes the drive door.



Add File

Add Folder

: Adds a file or folder to burn on the CD/DVD.



Option

: Sets options.

−

Session Closed

: Completes the burning on the CD/DVD.

−

Rewrite

: Deletes previously saved files and burns newly added files only.

Enabling

Quick Erase

deletes previously saved files more quickly.

−

Eject When Finished

: Ejects the CD/DVD automatically after completing

burning or erasing.



Erase Disc:

Deletes all data on the CD/DVD.



Burn:

Starts burning the selected files and folders on the CD/DVD.

NOTE:

The burning might not be successful if the remaining space of the disk is not enough when saving the

new data subsequently after adding files and folders.

NOTE:

Starting CD/DVD burning during recording might interrupt the recording.

NOTE:

Add File

and

Add Folder

functions are not supported for the DVD-R DL (Dual Layer) media.

Summary of Contents for ID391H



































































































Search results

Summary of Contents for ID391H

Reviews:

Related manuals for ID391H

Brands by name

Popular brands

Idis ID391H, User Manual

Search results

Summary of Contents for ID391H

Reviews:

Related manuals for ID391H

Brands by name

Popular brands